• Excellent adhesion
  • Moisture-resistant
  • 24 hour cure
  • One-part
  • High-strength
  • Paintable
  • Superior tooling


  • Bonds to most substrates without priming
  • Maintains bond in wet and moist conditions
  • Easy application
  • Durable bond to substrate


  • Automotive
  • HVAC
  • Manufacturing
  • Highway Safety


  • Steel
  • Aluminum
  • Galvanized
  • Galvalume
  • Laminates
  • Fiberglass
  • Plastics
  • Cement
  • Wood



  • 10.3 oz cartridge


  • Aluminum Gray

Technical Data Sheet


Safety Data Sheet

Not recommended for solvent sensitive plastics and foams, polystyrene or styrene containing plastic.


Interface and surfaces must be clean, dry and free of dust, dirt, oil, frost, moisture and water-proofing and release agents. Cut cartridge nozzle for 3/8” bead and puncture inner seal, apply as desired bead size. Always apply uniform bead and tool immediately after application to ensure full contact with both sides of the joint area. Sealant should not be exposed to direct sunlight or U.V.

3925 Stern Avenue   |   St. Charles, IL 60174   |   877.843.1818   |   info@surebond.com

Copyright © 2016 Surebond. All Rights Reserved.